资源类型

期刊论文 81

会议视频 2

年份

2023 1

2022 3

2021 6

2020 2

2019 7

2018 5

2016 3

2015 1

2014 2

2013 2

2012 2

2011 3

2010 5

2009 5

2008 9

2007 8

2006 1

2005 3

2004 6

2003 3

展开 ︾

关键词

中国汽车工业 2

汽车 2

汽车板 2

2-基展开 1

Al2O3-MxOy 1

Bent函数 1

Chrestenson谱 1

X射线阻射性 1

Z箍缩 1

m值逻辑函数 1

三流体喷嘴喷雾干燥技术 1

严格雪崩准则 1

中国聚变工程实验堆 1

临界热辐射通量 1

低污染 1

低油耗 1

做大做强 1

内燃机，燃料喷雾，喷雾控制，喷雾形态，喷油器 1

农业科学 1

展开 ︾

检索范围：

排序： 展示方式：

An experimental study on spray auto-ignition of RP-3 jet fuel and its surrogates

Yaozong DUAN, Wang LIU, Zhen HUANG, Dong HAN

《能源前沿（英文）》 2021年 第15卷 第2期   页码 396-404 doi: 10.1007/s11708-020-0715-y

摘要： Jet fuel is widely used in air transportation, and sometimes for special vehicles in ground transportation. In the latter case, fuel spray auto-ignition behavior is an important index for engine operation reliability. Surrogate fuel is usually used for fundamental combustion study due to the complex composition of practical fuels. As for jet fuels, two-component or three-component surrogate is usually selected to emulate practical fuels. The spray auto-ignition characteristics of RP-3 jet fuel and its three surrogates, the 70% mol -decane/30% mol 1,2,4-trimethylbenzene blend (Surrogate 1), the 51% mol -decane/49% mol 1, 2, 4-trimethylbenzene blend (Surrogate 2), and the 49.8% mol -dodecane/21.6% mol -cetane/28.6% mol toluene blend (Surrogate 3) were studied in a heated constant volume combustion chamber. Surrogate 1 and Surrogate 2 possess the same components, but their blending percentages are different, as the two surrogates were designed to capture the H/C ratio (Surrogate 1) and DCN (Surrogate 2) of RP-3 jet fuel, respectively. Surrogate 3 could emulate more physiochemical properties of RP-3 jet fuel, including molecular weight, H/C ratio and DCN. Experimental results indicate that Surrogate 1 overestimates the auto-ignition propensity of RP-3 jet fuel, whereas Surrogates 2 and 3 show quite similar auto-ignition propensity with RP-3 jet fuel. Therefore, to capture the spray auto-ignition behaviors, DCN is the most important parameter to match when designing the surrogate formulation. However, as the ambient temperature changes, the surrogates matching DCN may still show some differences from the RP-3 jet fuel, e.g., the first-stage heat release influenced by low-temperature chemistry.

关键词： RP-3 jet fuel     surrogate     spray auto-ignition     constant volume combustion chamber    

HTML PDF 收藏

An experimental study on ignition of single coal particles at low oxygen concentrations

Wantao YANG, Yang ZHANG, Lilin HU, Junfu LYU, Hai ZHANG

《能源前沿（英文）》 2021年 第15卷 第1期   页码 38-45 doi: 10.1007/s11708-020-0692-1

摘要： An experimental study on the ignition of single coal particles at low oxygen concentrations ( <21%) was conducted using a tube furnace. The surface temperature ( ) and the center temperature ( ) of the coal particles were obtained from the images taken by an infrared camera and thermocouples respectively. The ignition processes were recorded by a high-speed camera at different values and furnace temperatures . Compared with literature experimental data obtained at a high value, the ignition delay time decreases more rapidly as increases at the low region. The responses of and to the variation of are different: decreases while remains nearly constant with increasing at a low value. In addition, is less sensitive to while the ignition temperature is more sensitive to at a low value than in air. Observations of the position of flame front evolution illustrate that the ignition of a coal particle may change from a homogeneous mode to a heterogeneous or combined ignition mode as decreases. At a low value, buoyancy plays a more significant role in sweeping away the released volatiles during the ignition process.

关键词： coal particles     low oxygen concentration     ignition     ignition temperature     ignition modes    

HTML PDF 收藏

燃油喷雾形态主动控制的可能性 Review

Masataka Arai

《工程（英文）》 2019年 第5卷 第3期   页码 519-534 doi: 10.1016/j.eng.2019.04.010

摘要：

内燃机（ICE）对于汽车是有吸引力的动力源，具有良好的可储存性、可运输性，同时需要供应高能量密度的液体燃料。具有高性能和低环境危害的紧凑型内燃机是内燃机发展趋势。未来必须把燃油喷雾智能主动控制的燃烧作为解决传统内燃机相关重大问题（如排放）的突破性技术。已发展出在喷雾期间形成预期的燃料喷射速率和喷射模式的技术，并且传统内燃机可以在一定程度上控制燃烧。但是在燃烧范围内，燃料在空间上的扩散并未取得预期进展。因此，对于燃烧的智能控制，新且有效的燃油喷雾主动控制技术是非常必要的。空化、闪蒸、喷雾- 喷雾相互作用、喷雾-壁面相互作用和空气流动是有可能实现燃油喷雾形态主动控制的基础。本文使用文献中的论据来讨论未来喷雾燃烧的智能紧凑内燃机中喷雾形态主动控制技术的可能性。

关键词： 内燃机，燃料喷雾，喷雾控制，喷雾形态，喷油器    

HTML PDF 收藏

Numerical study of ignition mechanism of n-heptane direct injection compression-ignition engine

Xiaoping GUO, Zhanjie WANG,

《能源前沿（英文）》 2009年 第3卷 第4期   页码 432-439 doi: 10.1007/s11708-009-0050-9

摘要： A detailed chemical dynamical mechanism of oxidation of n-heptane was implemented into kiva-3 code to study the ignition mechanism of a high-temperature, high-pressure, three-dimensional-space, transient turbulent, non-homogeneous, mono-component fuel in the engine. By testing the quantity of the heat released by the chemical reaction within the cylinder cell, the elementary reaction showing an obvious increase in the cell temperature was defined as ignition reaction and the corresponding cell as ignition position. The main pathway of the ignition reaction was studied by using the reverse deducing method. The result shows that the ignition in the engine can be divided into low-temperature ignition and high-temperature ignition, both of which follow the same rule in releasing heat, called the impulse heat releasing feature. Low-temperature ignition reaction, whose ignition reaction is c5h9o1-4=ch3cho+c3h5-a, follows the oxidation mechanism, while high-temperature ignition reaction, whose ignition reaction is c2h3o1-2=ch3co, follows the decomposition mechanism. No matter which ignition it is in, the chemical reaction that restrains the ignition reaction from lasting is the deoxidization reaction of alkylperoxy radicals.

关键词： compression-ignition engine     ignition mechanism     elementary reaction     n-heptane    

HTML PDF 收藏

Numerical investigation of the effects of fuel spray type on the interaction of fuel spray and hot porous

ZHAO Zhiguo, XIE Maozhao

《能源前沿（英文）》 2008年 第2卷 第1期   页码 59-65 doi: 10.1007/s11708-008-0022-5

摘要： The interaction between two types of fuel spray and a hot porous medium is studied numerically by using an improved version of KIVA-3V code. The improved KIVA-3V code is incorporated with an impingement model, a heat transfer model and a linearized instability sheet atomization (LISA) model to model the hollow cone spray. An evaporating fuel spray impingement on a hot plane surface was simulated under conditions of experiments performed by Senda to validate the reasonability of the KIVA-3V code. The numerical results conform well with experimental data for spray radius in the liquid and the vapor phases. Computational results on the interaction of two types of the fuel spray and the hot porous medium show that the fuel spray can be split, which provides conditions for quick evaporation of fuel droplets and mixing of fuel vapor with air. The possibility of fuel droplets from hollow cone spray crossing the porous medium reduces compared with that from solid cone spray, with the same initial kinetic energy of fuel droplets in both injection types.

关键词： improved version     impingement     atomization     hollow     radius    

HTML PDF 收藏

Particle formation of hydroxyapatite precursor containing two components in a spray pyrolysis process

W. Widiyastuti, Adhi Setiawan, Sugeng Winardi, Tantular Nurtono, Heru Setyawan

《化学科学与工程前沿（英文）》 2014年 第8卷 第1期   页码 104-113 doi: 10.1007/s11705-014-1406-1

摘要： The particle formation mechanism of hydroxyapatite precursor containing two components, Ca(OOCCH ) and (NH ) HPO with a ratio of Ca/P= 1.67, in a spray pyrolysis process has been studied by computational fluid dynamics (CFD) simulation on the transfer of heat and mass from droplets to the surrounding media. The focus included the evaporation of the solvent in the droplets, a second evaporation due to crust formation, the decomposition reaction of each component of the precursor, and a solid-state reaction that included the kinetic parameters of the precursor regarding its two components that formed the hydroxyapatite product. The rate of evaporation and the reacted fraction of the precursor both increased with temperature. The predicted average size of the hydroxyapatite particles agreed well with the experimental results. Therefore, the selected models were also suitable for predicting the average size of particles that contain two components in the precursor solution.

关键词： droplet     hydroxyapatite particle     CFD     tubular furnace     spray pyrolysis    

HTML PDF 收藏

Influence of different oil feed rate on bituminous coal ignition in a full-scale tiny-oil ignition burner

Chunlong LIU, Qunyi ZHU, Zhengqi LI, Qiudong ZONG, Xiang ZHANG, Zhichao CHEN

《能源前沿（英文）》 2013年 第7卷 第3期   页码 406-412 doi: 10.1007/s11708-013-0266-6

摘要： To reduce oil consumption during firing-up and partial-load operation, a tiny-oil ignition burner has been recommended. Through reacting-flow experiments performed on a full-scale experimental setup, the influence of different oil flow rates on bituminous coal combustion as well as flow rates without coal feed was analyzed. The ignition burner is identical to that normally used in an 800 MWe utility boiler. Under operating conditions with flow rates of 50, 100, and 150 kg/h, gas temperature distributions were measured in the burner. At the equivalent measuring points at the exits of the first and second combustion chambers, these distributions remained almost unchanged under a constant coal feed rate of 4 t/h. However on the burner centerline, distributions increased slightly with increasing flow rate. Different gas concentrations were measured at the center of the burner exit. For instance, the O concentration at the burner exit varied from 0.01% to 0.31% whereas CO concentrations were more than 10000 ppm. At the same coal feed rate of 4 t/h, burner resistances are 480, 600, and 740 Pa for oil flow rates of 50, 100, and 150 kg/h, respectively.

关键词： ignition     coal     burner     boiler     oil flow rate    

HTML PDF 收藏

Numerical simulation of combustion characteristics at different coal concentrations in bituminous coal ignitionin a tiny-oil ignition burner

Chunlong LIU, Qunyi ZHU, Zhengqi LI, Qiudong ZONG, Yiquan XIE, Lingyan ZENG

《能源前沿（英文）》 2013年 第7卷 第2期   页码 255-262 doi: 10.1007/s11708-013-0255-9

摘要： With the objective of producing a full-scale tiny-oil ignition burner, identical to the burner used in an 800 MWe utility boiler, numerical simulations were performed using Fluent 6.3.26 to study the progress of ignition for four coal concentration settings covering sub-operation conditions prevailing during the experiments performed with the burner. The numerical simulations conformed to the experimental results, demonstrating the suitability of the model used in the calculations. Simulations for a coal concentration of 0.40 kg/kg corresponding to a single burner operating at its rated output were also conducted, which indicated that gas temperatures along the burner centerline were high. As gas flowed to the burner nozzle, the high-temperature region expanded, ensuring a successful pulverized-coal ignition. With increasing coal concentration (0.08–0.40 kg/kg), the gas temperature along the burner centerline and at the first and second combustion chamber exits decreased at the equivalent radial points. At the center of the second combustion chamber exit, the O concentrations were almost depleted for the five coal concentrations, while the CO concentrations peaked.

关键词： numerical simulation     tiny-oil ignition burner     pulverized coal     temperature field    

HTML PDF 收藏

柴油在热壁面上的着火

栗元龙,陆守香,范维澄

《中国工程科学》 2004年 第6卷 第11期   页码 63-65

摘要：

研究了柴油机燃料泄漏后在热壁上的着火，利用统计方法得到着火的临界温度。发现样品燃料的热壁着火温度与自燃点的差值比其它燃料热壁着火的相应值要小得多，而且着火方式也有很大差异。详细解释了泄漏后的液体在热表面上的沸腾蒸发模式，给出了燃料蒸气的质量流率推导公式。

关键词： 热壁面     着火实验     沸腾    

HTML PDF 收藏

Plasma spray coating on interconnector toward promoted solid oxide fuel cells and solid oxide electrolysis

《能源前沿（英文）》 doi: 10.1007/s11708-023-0901-9

摘要： Interconnector is a critical component to construct solid oxide cells (SOCs) stack. Oxidation of metallic interconnectors and Cr poisoning caused by oxidation are important factors that lead to long-term performance degradation of SOCs. Coating on the interconnector surface is an important approach to inhibit the oxidation and Cr migration of the interconnector. Herein, (La0.75Sr0.25)0.95MnO3–δ (LSM) and Mn1.5Co1.5O4 (MCO) are used to fabricate the coatings of interconnector. Two advanced thermal spray technology, atmospheric plasma spraying (APS) and low-pressure plasma spray (LPPS), are adopted for the coating preparation. The electrochemical performance, rising and cooling cycle stability, and Cr diffusion inhibition performance of the coatings are tested and evaluated. The result indicates that MCO can generate more uniform and denser coatings than LSM. In addition, MCO coatings prepared by LPPS shows the best electrochemical performance, rising and cooling cycle stability, and Cr diffusion inhibition. The initial area specific resistance (ASR) is 0.0027 Ω·cm2 at 800 °C. After 4 cooling cycle tests, the ASR increases to 0.0032 Ω·cm2 but lower than other samples. Meanwhile, the relative intense of Cr at the interface of SUS430 with MCO coatings fabricated by LPPS is lower than that of MCO fabricated by APS after 4 rising and cooling cycle operations, showing more favorable Cr diffusion inhibition performance.

关键词： interconnector coating     plasma spray     electrochemical performance     Cr diffusion inhibition     solid oxide cells (SOCs)    

HTML PDF 收藏

Effect of distributions of fuel concentration and temperature on ignition processes in a diesel PCCI

Yang YU, Wanhua SU,

《能源前沿（英文）》 2010年 第4卷 第2期   页码 269-279 doi: 10.1007/s11708-009-0046-5

摘要： The distributions of fuel concentration and temperature have significant effect on the ignition processes of diesel premixed charge compression ignition (PCCI) combustion. It was found in this study that the ignition process of PCCI combustion organized by multi-pulse injection was strongly influenced by conditions of fuel stratification. The start of low temperature reactions occurred in the leaner area of the combustion chamber in the test engine because the temperature here first reached the point of low temperature reactions. Ignition always occurred in the position where the mixture featured with equivalence ratios close to the mean equivalence ratio of the overall mixture, while the neighboring area of the initial ignition area accumulate heat with a finite speed until finally autoigniting. Moreover, the appearance of highest combustion temperature occurred in the same area at the combustion chamber. For more homogeneous mixture, a higher amount of mixture reached ignition simultaneously, resulting in a larger initial ignition area and a higher temperature at the ignition area. Furthermore, V-type distribution of equivalence ratio was found to be beneficial to retarding high temperature reaction.

关键词： PCCI     fuel stratification     multi-pulse injection     ignition    

HTML PDF 收藏

Study on electrical ignition and micro-explosion properties of HAN-based monopropellant droplet

Yonggang YU, Ming LI, Yanhuang ZHOU, Xin LU, Yuzhu PAN,

《能源前沿（英文）》 2010年 第4卷 第3期   页码 430-435 doi: 10.1007/s11708-010-0010-4

摘要： In order to study the electrical ignition characteristics of hydroxylammonium nitrate (HAN)-based liquid propellant, an experimental device for the electrical heating ignition of a liquid propellant droplet was designed. By using a high speed camera system, the ignition properties of the LP1846 single droplet were observed at different electrical heating speeds. The results show that when the LP1846 droplet is electrified, it mainly goes through an evaporization process, a periodic expansion and contraction process, a stronger thermal decomposition process, and an ignition and combustion process. The periodic expansion and contraction process accompanies the droplet micro-explosion phenomenon, and the micro-explosion mechanism is formed mainly due to the overheated water component in LP1846. When peak load voltage is from 80 to 140V/s, the ignition delay of the LP1846 droplet is linearly shortened from 0.82 to 0.62s, but the flame is lighter. Based on the above experiments, a simplified model of the electrical heating ignition of the LP1846 single droplet is established.

关键词： liquid propellant     electrical ignition     ignition delay time     transient measurement    

HTML PDF 收藏

New experimental technique to determine coal self-ignition duration

ZHANG Xinhai, XI Guang, ZHANG Xinhai

《能源前沿（英文）》 2008年 第2卷 第4期   页码 479-483 doi: 10.1007/s11708-008-0058-6

摘要： An artificial neural network (ANN) model was adopted to simulate the relationship between self-ignition duration and sulfur content, ash content, oxygen consumption rate, carbon monoxide as well as carbon dioxide generation rate of coal at different temperatures of self heating process. The data from spontaneous combustion experiments were used for ANN training to obtain the connection strength between nerve cells. An oil-bath programmed temperature experiment device was designed and the experimental condition and the size of the test tube were determined for testing the oxygen consumption and the gases generation rate of coal during self-heating process. The sulfur content, the ash content and the data from the oil-bath experiment were taken as ANN inputs to calculate the experiment self-ignition duration of coal. Compared with spontaneous combustion experiment, less than 1% of coal sample and 10% of time are required with an error of less than 3 days to test self-ignition duration of coal.
HTML PDF 收藏

Experimental study of the effects of structured surface geometry on water spray cooling performance in

Minghou LIU, Yaqing WANG, Dong LIU, Kan XU, Yiliang CHEN

《能源前沿（英文）》 2011年 第5卷 第1期   页码 75-82 doi: 10.1007/s11708-010-0014-0

摘要： Experiments were conducted to study the effects of enhanced surfaces on heat transfer performance during water spray cooling in non-boiling regime. The surface enhancement is straight fin. The structures were machined on the top surface of heated copper blocks with a cross-sectional area of 10 mm×10 mm. The spray was performed using Unijet full cone nozzles with a volumetric flux of 0.044–0.053 m /(m ·s) and a nozzle height of 17 mm. It is found that the heat transfer is obviously enhanced for straight fin surfaces relative to the flat surface. However, the increment decreases as the fin height increases. For flat surface and enhanced surfaces with a fin height of 0.1 mm and 0.2 mm, as the coolant flux increases, the heat flux increases as well. However, for finned surface with a height of 0.4 mm, the heat flux is not sensitive to the coolant volumetric flux. Changed film thickness and the form of water/surface interaction due to an enhanced surface structure (different fin height) are the main reasons for changing of the local heat transfer coefficient.

关键词： spray cooling     finned surface     heat transfer    

HTML PDF 收藏

中国汽车工业的发展道路：回顾与展望——合作与自主问题

郭孔辉

《中国工程科学》 2004年 第6卷 第8期   页码 17-20

摘要：

文章对中国汽车工业发展道路存在的重大分歧和争论——“合作与自主问题”进行了分析和阐述，提出了中国汽车工业发展的出路，并阐明通过主动争取双赢平等的国内外合作，创造自有知识的自主品牌，形成自己的核心技术；中国完全有能力也有条件走自主开发之路。

关键词： 中国汽车工业     发展道路     合作与自主    

HTML PDF 收藏

标题 作者 时间 类型 操作

An experimental study on spray auto-ignition of RP-3 jet fuel and its surrogates

Yaozong DUAN, Wang LIU, Zhen HUANG, Dong HAN

期刊论文

An experimental study on ignition of single coal particles at low oxygen concentrations

Wantao YANG, Yang ZHANG, Lilin HU, Junfu LYU, Hai ZHANG

期刊论文

燃油喷雾形态主动控制的可能性

Masataka Arai

期刊论文

Numerical study of ignition mechanism of n-heptane direct injection compression-ignition engine

Xiaoping GUO, Zhanjie WANG,

期刊论文

Numerical investigation of the effects of fuel spray type on the interaction of fuel spray and hot porous

ZHAO Zhiguo, XIE Maozhao

期刊论文

Particle formation of hydroxyapatite precursor containing two components in a spray pyrolysis process

W. Widiyastuti, Adhi Setiawan, Sugeng Winardi, Tantular Nurtono, Heru Setyawan

期刊论文

Influence of different oil feed rate on bituminous coal ignition in a full-scale tiny-oil ignition burner

Chunlong LIU, Qunyi ZHU, Zhengqi LI, Qiudong ZONG, Xiang ZHANG, Zhichao CHEN

期刊论文

Numerical simulation of combustion characteristics at different coal concentrations in bituminous coal ignitionin a tiny-oil ignition burner

Chunlong LIU, Qunyi ZHU, Zhengqi LI, Qiudong ZONG, Yiquan XIE, Lingyan ZENG

期刊论文

柴油在热壁面上的着火

栗元龙,陆守香,范维澄

期刊论文

Plasma spray coating on interconnector toward promoted solid oxide fuel cells and solid oxide electrolysis

期刊论文

Effect of distributions of fuel concentration and temperature on ignition processes in a diesel PCCI

Yang YU, Wanhua SU,

期刊论文

Study on electrical ignition and micro-explosion properties of HAN-based monopropellant droplet

Yonggang YU, Ming LI, Yanhuang ZHOU, Xin LU, Yuzhu PAN,

期刊论文

New experimental technique to determine coal self-ignition duration

ZHANG Xinhai, XI Guang, ZHANG Xinhai

期刊论文

Experimental study of the effects of structured surface geometry on water spray cooling performance in

Minghou LIU, Yaqing WANG, Dong LIU, Kan XU, Yiliang CHEN

期刊论文

中国汽车工业的发展道路：回顾与展望——合作与自主问题

郭孔辉

期刊论文